2.4G RF Remote dimmer | Push dimmer | Brightness stepless dimming Trailing edge(ELV) phase-cut | Set up min brightness
| Product Name | AC Triac Dimmer (2.4G+Push) |
|---|---|
| Model No. | TRI-C1 |
| Input Voltage | 100-240V~ 50/60Hz |
| Output Voltage | 100-240V~ |
| Output Current | Max 1.36A |
| Output Power | 150W @110V |
| Dim Method | RF wireless dimming |
| 2.4G RF Control Distance | 30m |
| IP Rate | – |
| Working Temperature | -10~40°C |
The connected lamp input voltage is 110V, power do not exceed 150W; input voltage is 220V, power do not exceed 300W;
Have switch to test temperature and over heat / load protection
it only support to turn on/off light and can not dim light once this mode had been activated
Compatible with the following remotes
One lighting fixtures can transmit the signals from the remote control to another lighting fixtures within 30m, as long as there is a lighting fixtures within 30m, the remote control distance can be limitless.
Stepless dimming, without any screen flickering
Long press：increase/decrease brightness (Long press and release, then long press to change)
Installation Diagram
Supports standard bottom boxes with depth above 50mm
