Control the lighting brightness by connecting 1~10V or 0~10V signal or 2.4GHz remote
| Product Name | 40W 0/1~10V Dimming Driver |
|---|---|
| Model No. | PL1 |
| Input Voltage | AC180~240V 50/60Hz |
| Output Voltage | DC30-40V |
| Output Current | 900mA (Constant Current) |
| Output Power | Max 40W |
| PF | >0.9 |
| Dimming range | 0~100% |
| Signal Input | 0~10V |
| RF | 2.4GHz |
| Control Distance | 30m |
| IP Rate | – |
| Temperature | ta: 50℃ |
Compatible with the following remotes
One lighting fixtures can transmit the signals from the remote control to another lighting fixtures within 30m, as long as there is a lighting fixtures within 30m, the remote control distance can be limitless.
In the first time operation, when you use one remote to link the product, you can control many controllers directly by 0/1~10V dimming panel without the controlling from the linked remote.
In the first time operation, Link the product to same remote and same zone
Auto-transmitting and auto-synchornization controlling
In the first time operation, Link the product to same remote and same zone
Auto-transmitting and auto-synchornization controlling
Note: If you need the 0/1~1V dimming panel to control many controllers at the same time, you must use same remote and same zone to link the controller. Controller just transmit the signal from the first time operation linked by remote (The signal is first signal); if you want to change, you need to unlink the first signal, then use another remote to link it (this signal is the first signal from remote), so when you want to change, please unlink the first signal, then link to another.
2.4G remote control connection diagram
Link/unlink with remote or smartphone
0~10V dimming panel connection diagram
1~10V dimming panel connection diagram
