Sí, siguiendo las instrucciones para configurar el dispositivo https://developer.tuya.com/en/docs/iot/HA_HB_Bestpractice?id=Kamfbszoffjmw

¡Atención!
1. WL-Box1 WL-433 no se puede configurar.
2. Admite WL-Box2 para conectarse con Home Assistant y Homebridge, pero el control de grupo es inútil.

No, pero puede usar Homebridge para obtener la función Homekit, siguiendo las instrucciones para configurar el dispositivo https://developer.tuya.com/en/docs/iot/Tuya_Homebridge_Plugin?id=Kamcldj76lhzt

¡Atención!
1. WL-Box1 WL-433 no se puede configurar.
2. Admite WL-Box2 para conectarse con Home Assistant y Homebridge, pero el control de grupo es inútil.

8KHZ:Press “OFF” button 1 time within 3 seconds and press “ON” button 5 times, Activated successfully once led light flashes 2 times quickly.

250HZ:Press “ON” button 1 time within 3 seconds and press “OFF” button 5 times, Activated successfully once led light flashes 2 times slowly.

Warm tips: user can change low frequency(250HZ) to avoid the beep noise from mains, checking video

9 new dynamic mode: short press “ S+ ” button 5 times quickly until blue light flashes 3 times slowly while light is in static mode.

9 old dynamic mode: short press “ S- ” button 5 times quickly until blue light flashes 3 times slowly while light is in static mode.

Warm tips: some users like old dynamic mode, the rest users prefer the new one, do as what you want, checking video

DND mode is not activated on your device, All miboxer products have DND mode and factory defult for DND mode is ON

Press “OFF” button 3 times within 3 seconds and press “ON” button 3 times, Activated successfully once led light flashes 4 times quickly.

Warm tips: DND mode can help user to save power if they have power failure problem frequently, checking video

Actually you can do that, but we still suggest to use CCT controller

User must select correct output mode for those 3 controllers before using it, 2 in 1 controller can work with single color or cct led strip. For example, your
controller can not work well if led strip is single color, but output mode from controller is CCT type.

Press “SET” button on controller continuously to get different output mode, red indicator means single color output mode, green indicator means CCT output
mode, checking video

User must select correct output mode for those 3 controllers before using it, 3 in 1 controller can work with RGB,RGBW or RGB+CCT led strip. For example,
your controller can not work well if led strip is RGB, but output mode from controller is RGB+CCT type.

Press “SET” button on controller continuously to get different output mode, red indicator means RGB output mode, green indicator means RGBW output
mode, blue indicator means RGB+CCT output mode,checking video

zigbee network is failed,please check your home network and pair lights into network again.

The mains of lighting fixture must be broken if zigbee network works correctly, please call Miboxer after sales service if the light is under warranty period.

LED chips are broken, please contact with MiBoxer after sales service if the light is under warranty period

Short press”OFF” button until the light flashes 1 time and indicator of dimmer becomes flashing, short press “OFF” button to set up mini brightness 3%,5%,7%,9%,12%,17%,22%,28%,34%,40%. short press any button except “OFF” on remote to finish setting

Long press “OFF” button on remote until the light is on slightly,checking video

Warm tips: night light mode is useful for sleeping ambience.

FUTD01 is DMX transmitter, communication bridge between 2.4G and DMX512 products, the transmitter is only work with Miboxer RGB+CCT products.

Ensure that your router is 2.4G wifi, not 5G wifi or 5G router, finish configuration again, checking video

Those 3 APP for old generation series, Miboxer had updated wifi series, we suggest to use Miboxer smart or Tuya smart APP, please contact with Miboxer after
sales service if your device is under warranty period.